Auto-Air 4100 Series Aluminum Base

Actual aluminum-flake colors often used as base for 4600 Series Candy Colors. Highly reflective – more so than 4300 Series silvers. Best applied over 4002 Sealer Dark or an underlying coat of Auto Air, not direct to the substrate. Aluminum Bases are may require a longer period to cure than what is required for most other Auto Air Colors due to coating used to prevent aluminum from gassing. Use of mid-coat prior to aggressive masking for graphics may prevent peeling. Mid-coat may be of a urethane inter-coat clear or Auto Air 4004 Transparent Base. Use of mid-coat may not be necessary, especially if Aluminum Base Colors are thoroughly cured. Intended for application with a spray gun or large tip-sized airbrush. Spray-Gun: 1.2mm tip Mini-Spray Gun: 1.0mm tip Airbrush: 0.5mm tip or larger Reduce: Spray Gun @ 10% per volume with 4011 Flash Reducer Airbush @ 30% per volume or more with 4011 Flash Reducer